HELP US SAVE THE WORLD, ONE BAG AT A TIME. ENCOURAGE BULK FOLDING
DEBOSSING
The stamping of a logo that provides a tone on tone appearance. Debossing is typically done on leather, polyester or on a Soft-Shell material and does not require foam backing unless applied to natural materials such as cotton or wool. Most commonly used for coasters, gloves, padfolios, bag tags, jackets, golf shirts, and polyester ball caps as an off-center decoration.
EMBOSSING
The Cadillac of 3D tone on tone decoration—a die with hollowed out components literally raising portions of the logo by using foam fill backing to achieve a true three-dimensional presentation. Typically done on leather; however, Embossing can also be done on both synthetic and natural materials. Most commonly used to decorate jackets or shirts as well blankets with access panels to hide the foam fill.
PVC
A beautiful soft PVC patch is created via injection mold. Small runs can be produced; however, larger quantities drastically reduce cost. PVC patches can now be heat applied to all types of headwear, golf shirts, jackets, virtually any fabric products. Extreme fine detail along with 100% accurate colour matching can be achieved and difficult to decorate products can now be decorated with relative ease using our exclusive heat protection application methods.
SOLUTIONS DIGITAL PRINT
This is a 4 colour printing process where the logo is digitally printed onto a thin film then heat applied to the product being decorated. The Solutions product family is available in many versions which include: Express Print, SuperTEK (which has sublimation blocking characteristics for sublimated products that tend to bleed) Metallic, Opaque (for extreme stretch requirements) and printable Glitter decoration.
Solutions Digital Print logos are ideal for decorating jackets, caps, toques, scarves, bags, soccer balls, footballs, basketballs and for leather applications such as golf gloves.
LIQUID METAL
This decoration defines the meaning of WOW when applied to a ball cap or any other textile decoration requirement.
These versatile 3-D logos:
•Have metallic and non-metallic finishes
•Incorporate full-color graphics
•Make complex shapes and individual letters
As a pressure sensitive decoration it can be applied to metal, glass or plastic; Liquid Metal can withstand the harshest of environmental outdoor conditions while preserving its luster wash after wash.
SEAMLESS
A hybrid method that combines digital print with screen transfer to achieve the perfect replication of any logo without requiring any contour or border around even the finest of text. Seamless has become the standard for logo replication via heat seal decoration techniques.
Also available in 3M reflective that can achieve far greater detail than CAD Cut 3M
TACKLEKNIT
A woven like material with pizzazz, this unique process combines the soft feel of a woven patch with the detail of a sublimated patch—exclusive to Embossing Solutions in the promotional products market. TackleKnit can be heat applied or used as a peel and stick appliqué motif, available in Base, Satin or Chevron finish. TackleKnit is perfect for team uniforms, caps and hard to embroider items which require incredible detail that just cannot be achieved with Embroidery.
DOMED LOGOS
An excellent method for a cost-effective pressure-sensitive 3D decoration. Products include laptops, appliances, hard case travel bags, cell phone cases, cars, motorcycles and windows. Domed logos are a fantastic way of tagging company property such as filing cabinets and printers for identification purposes.
EMBROIDERED PATCHES
Similar look to direct embroidery, without the constant irritation of the Pellon backing on the skin, perfect decoration method for blankets, scarves, and toques. Also available in a pressure sensitive version which allows the look of embroidery on items that cannot be embroidered directly.
Embroidered patches also allow for decoration on items such as the peaks of ball caps and act as an excellent way to cover up previous logos.
WOVEN PATCHES
A cost-effective way of achieving fine detail when large run decorations are required—typical runs of 500 or more are required; however, smaller runs can be accommodated where necessary. Heat applied application is ideal for all garments especially blankets, toques, shirts, jackets and ball caps.
SOFT TOUCH
Looking for the same look and feel of your favourite old tee shirt that you just can't part with? Soft Touch is the answer! Soft Touch is infused into the fibers of each garment so once decorated; the touch of even the most sensitive hand can’t feel the logo. Minimum fabric content mix is 60 Cotton / 40 Polyester and is to be used with lighter fabrics (not to be used with Black or Navy, the darker that fabric the more the Pantone of the logo will be affected by the colour of the garment). Soft Touch not only leaves you with an everlasting impression but is ideal for that vintage look when used on Heather Tees.
RAISED SILICONE
Rapidly becoming a new decoration standard for retail brand recognized manufacturers. Now available for all manufacturers products, this method of decoration has a 2-dimensional look.
Ideal for headwear and any other soft goods such as nylon bags, totes, golf shirts and textile jackets. Minimum 100 logos are typically required, and lead time is approximately 15 days from artwork approval.
3D PRINT
Similar to Raised Silicone only taking it to the next level with higher print and smoother curved edges to provide a true three-dimensional appearance—applied to literally all wearable goods and most soft goods. Minimums are 100-200 pieces and lead time is approximately 15 days from art work approval.
TPU
The next step in the evolution of Liquid Metal which allows for more detailed standalone components. Minimum requirements are typically 200 pieces and can only be applied to wearables that allow heat application from the underside of the product. This decoration technique has the WOW factor for even the most discerning of customers.
SUBLIMATED TWILL PATCH
The marriage between two decoration techniques, Twill and Sublimation. This marriage creates a new exciting patch that offers incredible detail, low cost set-up, and full or spot colour printing capabilities - available with or without merrow boarders.
This decoration gives an upscale look to standard print decorations and is ideal for ball caps, toques, mitts and blankets.
LEXTRA FLOCK HEAT TRANSFERS
The ultimate in velvet-like heat transfers; Lextra Transfers fill the gap between embroidery and screen printing. Decorations are usually found on shirts, shorts, hats, bags and more.
One of the official decorations used by Major League Baseball teams and the European Soccer Federation.
LEXTRA 3D FLOCK HEAT TRANSFERS
Add the exclusive embroidery-like high-sheen ObiTex ® insert textile for a unique mixed-media graphics effect.
LEXTRA 4D FLOCK HEAT TRANSFERS
Add a 4th dimension of sublimation dye printed images on the ObiTex Inserts to create even more complex, compelling and dimensionalized graphics for product differentiation.
PLEASE NOTE
This decoration is for larger program based requirements only as a minimum of 500 logos is required, the
of this decoration is once the logos are on hand they can be applied to literally all beauty non leather materials on an as
required basis. The ideal decoration for golf shirts, ball caps, jackets, blankets, bags, toques etc. Also available in a pressure sensitive product for hard good decoration.